Services - Wittich Industriebodensanierung GmbH

Concept & Administration

Consulting, planning, site management and property supervision
Logistics and organization of construction projects in cooperation with all responsible persons and decision makers
Construction with individual solutions tailored to your time and budget

Refurbishment of joints and cracks as a rigid or flexible design with our Flex-Flight technology for heavy duty requirements
Repair of spalling and defects

Surface renewal of damaged areas and stabilization of critical substrates.

Grinding cleaning with non-woven pads to achieve a clean and flat surface – keyword “concrete cosmetics”
Alloys for increasing soil hardness
Silicification (pore filling with silicon dioxide)
Hydrophobing (method for obtaining a water-repellent floor)
Partial or full scale exchange
Pressing of voids and cracks in the underground by injection

Coating of industrial floors with application characteristics of all kinds such as:

Plastic and mineral coatings such as:

Impregnations, glazings and sealants for differentiated uses

Installation and renovation of underlay screeds, heating screeds (mineral screed floor construction combined with heating elements) and utility screeds such as bitumen emulsion and plastic
Dispersion screeds
Assembly of seals and osmotic barriers (against rising damp)
Construction of concrete surfaces with hard grain litter material (achieves a smooth, abrasion and impact-resistant surface)

Substrate preparation by means of:

High pressure blasting with water
Injector jets (for very fine and small areas)
Flame blasting (with a 3200 ° C acetylene flame against organic impurities such as oils or fats)
Milling (especially suitable for very resistant soil layers)
Shot peening (if only a thin layer should be removed)
Diamond grinding (provides the most effective results)

Renewal of joint profiles as, inter alia:

Working, changing and retrofitting of floor drains, slotted and box gutters.

Complete refurbishment and construction of concrete piling and protection guards as well as partial refurbishment and construction for concrete protection, plus plastic, steel or wood
Ramp construction and renovation

Renovation of floors in cold stores and cold stores up to -40 ° C:

Installation of TK tongues (special heatings in the transitions between differently tempered hall areas to prevent the formation of ice), driving concrete heaters and thermal separations as well as component profiles
Removal of damaged areas and outbreaks as well as cracks and joints with special materials

Renovation of monolithic floors (usually concrete slabs) and composite systems (usually consisting of a floor concrete slab plus screed)
Concreting with ConFormat® concrete (low shrinkage), rolled concrete (concrete is compacted with rollers) or steel fiber reinforced concrete (for high load capacity)

Disassembly, dismantling and removal of machinery and equipment in the area to be rehabilitated

Diagnosis of damaged areas and determination of characteristic values for industrial floors:

Adhesive tensile strength (degree of adhesion of coatings on concrete surfaces)
Compressive and flexural strength
Shear strength (degree of resistance to displacement of individual floor slabs)
Shrinkage behavior (degree of shortening or volume reduction of the concrete due to drying out)
Porosity and density
Cross-sectional assessments through core drilling
Measurement of height differences with leveling device

Expert structural, physical and chemical statements